Bollard Mounting Kit (for 1/4" Base Plate)
- Weight:
- 4.00 LBS
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
Installation hardware for all bollards that include a base plate. This kit contains (x4) 5/8" x 4-1/2" Zinc Plated Wedge Anchors to anchor your bollard into the existing concrete. Each Wedge Anchor includes a finish nut and flatwasher.
This kit is intended to be used with the following Bollards:
ASP-BOL-4201
ASP-BOL-3601
ASP-BOL-4202
Diameter: |
5/8" |
Length: |
4-1/2" |
Finish: |
Zinc Plated |
Related Products
4-1/2" Diameter, 36" Tall Bollard (Yellow)
$90.00
36” tall x 4-1/2” round, ¼” x 8x8 base plate, powder coated safety yellow, top cap, 22 pounds, cap can be removed and this can be filled with concrete
4-1/2" Diameter, 42" Tall Chain Bollard (Yellow)
$105.00
42” tall x 4-1/2 round, , ¼ x 8 x 8 base plate, powder coated safety yellow, top cap, 26 pounds, cap can be removed and this can be filled with concrete, 2 chain hooks welded near the...
4-1/2" Diameter, 42" Tall Buried Bollard (Yellow)
$120.00
42” goes above ground and 18” made to be sunk in concrete for a total length of 60”, this comes with 2 rebar rods at ½” round x 10” long. powder coated safety...
4-1/2" Diameter, 36" Tall Buried Bollard (Yellow)
$105.00
36” goes above ground and 18” made to be sunk in concrete for a total length of 54”, this comes with 2 rebar rods at ½” round x 10” long. powder coated safety...
1/4"x2"x2" A36 Plate Washer (box of 35)
$33.00
1/4" Thick Square plate washer, all sides are 2". Grade A36 Material. Hole sizes will be slightly larger (~1/16") than the selected size to accommodate the bolt, and are punched to order after...
