Accessories

Material Zinc-Plated Thread Size 5/8"-11 Screw Size 5/8" Length 2-1/2" Drill Bit Size 7/8" Diameter 7/8" Thread Depth 1-3/16" Installation Depth(Min.)  2-1/2" Thread Direction Right Hand Thread Type Anchor Type   ...

Material Zinc-Plated Thread Size 3/4"-10 Screw Size 3/4" Length 3-1/8" Drill Bit Size 1" Diameter 1" Thread Depth 1-1/8" Installation Depth(Min.)  3-1/8" Thread Direction Right Hand Thread Type Anchor Type     ...

Material Zinc-Plated Thread Size 1/2"-13 Screw Size 1/2" Length 2" Drill Bit Size 5/8" Diameter 5/8" Thread Depth 3/4" Installation Depth(Min.)  2" Thread Direction Right Hand Thread Type Anchor Type       ...

3/8" Thick Square plate washer, all sides are 3". Grade A36 Material. Hole sizes will be slightly larger (~1/16") than the selected size to accommodate the bolt.

1/4" Thick Square plate washer, all sides are 2". Grade A36 Material. Hole sizes will be slightly larger (~1/16") than the selected size to accommodate the bolt.

1/2" turnbuckle body with 6" take up. Plain Finish. Turnbuckles are threaded Right Hand on one end & Left Hand on the other end.

Wilson Anchor Bolt Sleeve for 1-1/2" bolt, 4"x15" Body

Wilson Anchor Bolt Sleeve for 1-1/4" bolt, 3"x10" Body

Wilson Anchor Bolt Sleeve for 1" bolt, 3"x10" Body

Wilson Anchor Bolt Sleeve for 7/8" bolt, 2"x7" Body

Wilson Anchor Bolt Sleeve for 3/4" bolt, 2"x7" Body

Wilson Anchor Bolt Sleeve for 5/8" bolt, 2"x7" Body

Wilson Anchor Bolt Sleeve for 1/2" bolt, 2"x5" Body

MAKE SURE TO ADD THIS PRODUCT TO YOUR CART BEFORE CHECKOUT IF YOU REQUIRE CERTIFICATIONS. ONE CERTIFICATION COVERS ALL MATERIAL/GALVANIZING CERTIFICATIONS FOR YOUR ENTIRE ORDER, AND A C OF C FOR ANY NUTS AND WASHERS. REQUESTS FOR CERTS AFTER YOUR ORDER...

1/2" turnbuckle body with 6" take up. Hot Dip Galvanized. Turnbuckles are threaded Right Hand on one end & Left Hand on the other end.

5/8" turnbuckle body with 6" take up. Plain Finish. Turnbuckles are threaded Right Hand on one end & Left Hand on the other end.

5/8" turnbuckle body with 6" take up. Hot Dip Galvanized. Turnbuckles are threaded Right Hand on one end & Left Hand on the other end.

5/8" turnbuckle body with 6" take up. Plain Finish. Turnbuckles are threaded Right Hand on one end & Left Hand on the other end.

5/8" turnbuckle body with 6" take up. Hot Dip Galvanized. Turnbuckles are threaded Right Hand on one end & Left Hand on the other end.

7/8" turnbuckle body with 6" take up. Plain Finish. Turnbuckles are threaded Right Hand on one end & Left Hand on the other end.