Hot Roll

3/4-10" F1554 Grade 55 Fully Threaded RodHardware: Each rod comes with 1 Heavy Hex Nut and 1 F436 WasherStandard lengths are 6 inch, 12 inch, 18 inch, 24 inch, and 36 inch.Our rods are cut to length after order, for custom lengths not available online up...

Packge of 10: 1-8"x5" Heavy Hex Structural Bolt Hot Dipped Galvanized; these bolts meet the requirements of ASTM A325. An equal number of 2H Heavy Nuts & F436 Washers are provided loose for each bolt.

1/2-13" Grade 36 Fully Threaded RodHardware: Each rod comes with 1 Heavy Hex Nut and 1 F436 Washer.Standard lengths are 6 inch, 12 inch, 18 inch, 24 inch, and 36 inch.Our rods are cut to length after order, for custom lengths not available online up to...

1/2"x12" Structural Anchor Bolt, 1-1/2" Bend, and minimum 1-1/2" Thread Length.    Bent anchor bolts meeting ASTM standard F1554, offer robust anchoring solutions with their distinctive L-shaped design. Commonly used for attaching...

3/4"x12" Structural Anchor Bolt, 3" Bend, and minimum 4" Thread Length.    Bent anchor bolts meeting ASTM standard F1554, offer robust anchoring solutions with their distinctive L-shaped design. Commonly used for attaching building...

Packge of 20: 3/4-10"x2-3/4" Heavy Hex Structural Bolt HDG; these bolts meet the requirements of ASTM A325 and are domestically produced in the USA. An equal number of 2H Heavy Nuts & F436 Washers are provided loose for each bolt.

Package of 25: 3/4-10"x2-1/2" Heavy Hex Structural Bolt Hot Dip Galvanized; these bolts meet the requirements of ASTM A325 and are domestically produced in the USA. An equal number of 2H Heavy Nuts & F436 Washers are provided loose for each...

Package of 25: 3/4-10"x2" Heavy Hex Structural Bolt Hot Dip Galvanized; these bolts meet the requirements of ASTM A325 and are domestically produced in the USA. An equal number of 2H Heavy Nuts & F436 Washers are provided loose for each bolt.

Package of 20: 3/4-10"x2-1/4" Heavy Hex Structural Bolt Hot Dip Galvanized; these bolts meet the requirements of ASTM A325, and are domestically produced in the USA. An equal number of 2H Heavy Nuts & F436 Washers are provided loose for...

Package of 20: 3/4-10"x2-1/4" Heavy Hex Structural Bolt; these bolts meet the requirements of ASTM A325, and are domestically produced in the USA. An equal number of 2H Heavy Nuts & F436 Washers are provided loose for each bolt.

Package of 25: 3/4-10"x2" Heavy Hex Structural Bolt; these bolts meet the requirements of ASTM A325 and are domestically produced in the USA. An equal number of 2H Heavy Nuts & F436 Washers are provided loose for each bolt.

Material Zinc-Plated Thread Size 5/8"-11 Screw Size 5/8" Length 2-1/2" Drill Bit Size 7/8" Diameter 7/8" Thread Depth 1-3/16" Installation Depth(Min.)  2-1/2" Thread Direction Right...

Material Zinc-Plated Thread Size 3/4"-10 Screw Size 3/4" Length 3-1/8" Drill Bit Size 1" Diameter 1" Thread Depth 1-1/8" Installation Depth(Min.)  3-1/8" Thread Direction Right...

Material Zinc-Plated Thread Size 1/2"-13 Screw Size 1/2" Length 2" Drill Bit Size 5/8" Diameter 5/8" Thread Depth 3/4" Installation Depth(Min.)  2" Thread Direction Right Hand Thread...

Made of plated steel, three 6-1/2" adustable wheels, 1/2"x 24"shaft. Use regular duty 1/2"drill of 450 to 750 r.p.m. to mix in 12"diameter 5 gallon container of trowel mix viscosity in one minute; up to 16"diameter drum 26"deep in two minutes at 750 r.p...

Made of plated steel, 5" adustable wheels, 3/8"x 24"shaft. For 16" diameter container of paint viscosity material use 3/8" drill of 1000 to 1200 r.p.m. Made in Indianapolis,IN since 1950.  

Made of plated steel, 3-1/2" adustable wheels, 3/8"x 16"shaft. Use regular duty drill of 1000+ r.p.m. to mix in 1 gallon container. Made in Indianapolis,IN since 1950.  

Made of plated steel, 2-1/2" adustable wheels, 1/4"x 11"shaft. Use regular duty drill of 1800+ r.p.m. to mix in 1 gallon container. Made in Indianapolis,IN since 1950.  

1"x 24" Smooth Dowel available to ship within 1 business day. All of our smooth dowels are cut on precision saws. Available in F1554 A36 or SAE 304 Stainless Steel. If you prefer chamfered ends select the option under grade.

1"x 12" Smooth Dowel available to ship within 1 business day. All of our smooth dowels are cut on precision saws. Available in F1554 A36 or SAE 304 Stainless Steel. If you prefer chamfered ends select the option under grade.